This page outlines the latest updates to Solid Edge. All downloads listed require a valid GTAC login.
EditSolid Edge ST
EditMaintenance Pack 1
Product: Solid Edge
Version: 100.00.01.07
Date: 10-Oct-2008
This Maintenance Pack can be installed on top of Version: 100.00.00.133.
Note: Maintenance Packs are all inclusive and can be installed on top of the base release or any released Maintenance Pack.
EditAssembly
| Item | Description |
|---|
| PR 5969985 | Fixed a problem to prevent crashes reported in auto-captured crashlogs. |
| PR 5943101 | Fixed a problem that caused multiple JT crashes |
| PR 5899813 | Fixed a problem where Solid Edge crashed when editing a weld label |
| PR 5872719 | Fixed a problem where editing a Stitch Weld assembly feature causes an abort. |
| PR 1672958 | Fixed a problem where answering NO to a Save As simplified overwrite prompt deletes the existing file. |
| PR 5987019 | Fixed a problem where no bodies are created during import if imported files already exist in folder |
| PR 2082240 | Fixed a problem where "Export Display Only" is not working when editing a sub-assembly |
| PR 5902637 | Fixed a problem where Solid Edge crashes when opening a part from draft and in assembly. |
| PR 5842365 | Fixed a problem where FOA conversion loses configuration files. |
| PR 2070584 | Fixed a problem where a warning is not displayed when setting a part to inactive using configurations. |
| PR 5996894 | Fixed a problem with view rotation performance. |
| PR 1599941 | Fixed a problem where threaded holes in assembly have incorrect diameters. |
| PR 5997261 | Fixed a problem where you cannot place PMI annotations while IPA in a sync assembly |
| PR 1674763 | Fixed a problem where the match coordinate system command does not locate the coordinate system |
| PR 5999067 | Fixed a problem where part key points are not locatable after placing a CS |
| PR 2104933 | Fixed a problem where you cannot include normal to face using fence select |
| PR 6007266 | Fixed a problem where Physical Property Manager doesn't display unassigned density dialog |
| PR 1676717 | Fixed a problem where Rack and Pinion Gears Designer produces the wrong results |
| PR 1641424 | Fixed a problem where Solid Edge crashes when working with zones or saving a file containing zones. |
| PR 5987105 | Fixed a problem where Show/Hide is not working on Assembly groups. |
| PR 2105941 | Fixed a problem where Solid Edge crashed using the "Explode" command. |
| PR 1594089 | Fixed a problem where different end-conditions produce the same result on a frame. |
| PR 1600542 | Fixed a problem where deleted dim styles continue to show up in the template |
| PR 5874510 | Fixed a problem where Solid Edge entered into a not responding state while simplifying assembly |
| PR 5737340 | Fixed a problem where a circular dependency error is received using FlashFit. |
| PR 1545774 | Fixed a problem where parts disappear during move when a section is active. |
| PR 6000268 | Fixed a problem where orientating planes (n, b & t) fails in Traditional Assemblies |
| PR 2076104 | Fixed a problem where the user is unable to auto-restore a backed up file. |
| PR 1649779 | Fixed a problem where Solid Edge fires the wrong command ID when hitting DELETE key in assembly |
| PR 5999686 | Fixed a problem where SmartStep is not appearing when switching from FlashFit to Axial Align. |
| PR 1628066 | Fixed a problem with FOA and Assembly Features |
| PR 1668883 | Fixed a problem where moving a part causes duplicate occurrences to be created in Edgebar |
| PR 5992055 | Fixed a problem where you cannot fence locate when IPA – in Traditional |
| PR 6022024 | Fixed a problem where include fails |
| PR 1510690 | Fixed a problem where patterned parts are in the wrong position |
| PR 1681255 | Fixed a problem where Save As Image does not create a rendered image in Foundation |
| PR 5834085 | Fixed a problem where there is not a bolt for the given stack length. |
| PR 2088091 | Fixed a problem where it takes more time and memory to update the "Physical Properties" than V18 |
| PR 6016016 | Fixed a problem where the assembly file reader does not work with sync assemblies |
| PR 2085635 | Fixed a problem that caused Solid Edge to crash based on auto-captured crashlogs |
| PR 1610960 | Fixed a problem where Frame components are not trimming correctly on all corners |
| PR 1586883 | Fixed a problem where Part colors are not exported to step. |
| PR 5988839 | Fixed a problem where Sub-assm reference planes turned ON after using Undo. |
| PR 6023710 | Fixed a problem where washers are not available with a C'snk screw |
EditPart
| Item | Description |
|---|
| PR 5921066 | Fixed a problem where hole callouts for patterned counterbores and countersinks are wrong in draft |
| PR 5999436 | Fixed a problem where face-sets created by importing curves could not be deleted. |
| PR 5988541 | Fixed a problem where Inter-Part Copy Option is not available in SYNC environment |
| PR 5985795 | Fixed a problem where model geometry is not seen on opening new window for active document |
| PR 6004472 | Fixed a problem where Solid Edge hangs when docking pane is unpinned |
| PR 6006019 | Fixed a problem where Solid Edge crashes during the creation of a Helix |
| PR 6001450 | Fixed a problem where Solid Edge crashes after a Hole placement error message |
| PR 6005555 | Fixed a problem where Solid Edge crashes using the insert image command |
| PR 5771029 | Fixed a problem where constraining a fixed pattern doesn't work properly |
| PR 5998249 | Fixed a problem where associated occurrences are not removed when hole is deleted |
| PR 6003957 | Fixed a problem where sketch geometry is not consumed by protrusion operation |
| PR 5998971 | Fixed a problem where there is no shaded display for Acrylic High Density |
| PR 5986186 | Fixed a problem where double clicking in pathfinder isn't expanding if you are IPA |
| PR 5988132 | Fixed a problem where dimensions placed for a reference plane are driving dimensions |
| PR 5998262 | Fixed a problem where you are unable to edit coordinate dimensions placed on sketch |
| PR 2084562 | Fixed a problem where a Text Profile feature does not extend through part correctly |
| PR 6000298 | Fixed a problem where you must place cursor over DEC and hit Esc twice to dismiss. |
| PR 5844833 | Fixed a problem where a sheet metal part is displaying the wrong angle in draft |
| PR 6009190 | Fixed a problem where Pattern Variables are not showing in Variable Table |
| PR 5991387 | Change rectangular pattern from a 3-point rectangular back to 2-point rectangle in Traditional |
| PR 5986409 | Fixed a problem where the Break Link Option is active for a sketch. |
| PR 6006526 | Fixed a problem where Restore Sketch is removing all sketches from the file |
| PR 5986464 | Fixed a problem where the Group option is active when in sketch environment |
| PR 6003104 | Fixed a problem where an Undo error occurs after part document conversion to sync |
| PR 5989056 | Fixed a problem selecting objects that are behind other objects in Sync parts and assemblies |
| PR 6014762 | Fixed a problem where Solid Edge crashes after creating a Group and using "Measure Distance" |
| PR 6004169 | Fixed a problem where Solid Edge crashes after hitting ESC key while editing a pattern |
| PR 5991849 | Fixed a problem where additional context menu options active for simplify features. |
| PR 6020259 | Fixed a problem where you cannot select a planar face/plane after using Hide Previous Level |
| PR 6018241 | Fixed a problem where selecting a parting surface hangs Solid Edge |
| PR 6020895 | Fixed a problem where you are unable to place some PMI dimensions in assembly |
| PR 1620911 | Fixed a problem where convert to Sheet Metal operation fails |
| PR 6022795 | Fixed a problem where user defined sets are not listed if they contain System defined face sets |
| PR 6024210 | Fixed a problem where you can no longer attach a hole pattern on training part |
| PR 1641087 | Fixed a problem where Solid Edge crashes using FOP with an old part |
| PR 2082794 | Fixed a problem where an IGES file cannot be imported into ST if user login has double byte characters |
| PR 6006657 | Fixed a problem where editing a dimension causes Solid Edge to shutdown because of low memory |
| PR 1668197 | Fixed a problem where DIN.PZL will not be used for lofted flanges |
| PR 6020529 | Fixed a problem where Solid Edge crashes after selecting a model view in part pathfinder |
| PR 6018317 | Fixed a problem where Solid Edge crashes when placing a pattern in Sync part |
| PR 6019224 | Fixed a problem where you are unable to reset the HOLES.TXT file location to a server location. |
| PR 1682195 | Fixed a problem where separating a hole changes its diameter |
| PR 5993031 | Fixed a problem where a view disappears while sketching a line |
| PR 6013504 | Fixed a problem where some faces in the model do not belong to a face-set |
| PR 6006751 | Fixed a problem where the Hole Table is not listing the correct hole diameter for a counterbore |
| PR 6005614 | Fixed a problem where a pattern does not update after moving |
| PR 6027721 | Fixed a problem where you can only move one side of a sync part regardless of move arrow direction |
| PR 5610929 | Fixed a problem where Copy/Paste of Text Profile is not fully constrained like parent. |
| PR 6032804 | Fixed a problem where the Dissolve User Defined Set command does not work. |
| PR 6025031 | Fixed a problem where the provided assembly will not save to STL format. |
EditDraft
| Item | Description |
|---|
| PR 5999896 | Fixed a problem where explode flow lines did not display immediately after placement of a view. |
| PR 1666634 | Fixed a problem where a table style that is based on another style could not be edited. |
| PR 2104940 | Fixed a problem where hidden layers were not hidden after drawing view converted to 2D. |
| PR 1561801 | Fixed a problem where hardware parts were shown even when they did not intersect the cutting plane. |
| PR 6004783 | Fixed a problem where dimension values double on broken 2D views. |
| PR 5982657 | Fixed a problem where importing a Microstation 2-D dgn file causes Solid Edge to crash |
| PR 2103557 | Fixed a problem where Blocks are not exporting to dxf on Japanese XP. |
| PR 1670678 | Fixed a problem where Line width to ACAD Color mapping does not work for dimensions |
| PR 6000417 | Fixed a problem where you cannot exit a Block edit using close button. |
| PR 6000905 | Fixed a problem where opening a DGN file causes Solid Edge to abort |
| PR 1593505 | Fixed a problem where Solid Edge crashed when deleting a symbol with bottom-up locate |
| PR 5991964 | Fixed a problem where "Error: no reference" displayed in callouts linked to missing properties |
| PR 5990835 | Fixed a problem where Solid Edge aborts after repeatedly updating views |
| PR 5971763 | Fixed a problem where you are unable to Copy/Move multiple elements in Draw in View. |
| PR 1619152 | Fixed a problem where a drawing border is not saved out in pdf |
| PR 1632537 | Fixed a problem where save as a pdf rotates the output from a draft file. |
| PR 5841236 | Fixed a problem where zooming with Ctrl+RMB deselects geometry |
| PR 1616825 | Fixed a problem where hitting the number 5 on the numeric key pad selects Endpoint |
| PR 1603406 | Fixed a problem with performance when mirroring grouped elements in a draft-view |
| PR 1656622 | Fixed a problem where an image is disappearing after pasting into Draft. |
| PR 1585174 | Fixed a problem where Blocks were being placed corrupted. |
| PR 5992242 | Fixed a problem where EMF's are scaled incorrectly |
| PR 1535069 | Fixed a problem where you are unable to hide edge segments |
| PR 5421845 | Fixed a problem where the font changes depending on how text box is selected |
| PR 5745434 | Fixed a problem where a Block Name is not reflected in pathfinder if you undo after deleting |
| PR 1683721 | Fixed a problem where you get incorrect dimension values to centermarks between views |
| PR 1625644 | Fixed a problem where you cannot open specific Acad files |
| PR 6012783 | Fixed a problem where a bitmap object regenerates on every display |
| PR 1659278 | Fixed a problem where Open File -> AutoCAD documents -> causes Solid Edge to crash. |
| PR 5996870 | Fixed a problem where the ACAD Wizard does not start for files with JPN characters in filename. |
| PR 2107915 | Fixed a problem where data alignment in table properties is incorrect |
| PR 2105954 | Fixed a problem where Japanese fonts are not mapped to ACAD fonts for export. |
| PR 6000242 | Fixed a problem where you are unable to import an STL file. |
EditAPI
| Item | Description |
|---|
| PR 5999875 | Fixed a problem where template names were truncated in the Application Menu |
| PR 6010963 | Fixed a problem with Automation Commands Swept Surface, Revolved Surface and Extruded Surface issues. |
| PR 6010151 | Fixed a problem where a few of the Automation APIs are not working for Sync Curves. |
| PR 6011974 | Fixed a problem where a few Automation APIs are not working for Sync surfaces |
| PR 6016486 | Fixed a problem where the Toolbar sample does not work properly |
| PR 2103667 | Fixed a problem where the Symbol ConvertToGroup API is leaving geometry out of shape |
| PR 6012518 | Fixed a problem where the Mirror API is not working |
| PR 6011839 | Fixed a problem where 'SetOrientation' fails on a Sync Coordinate System. |
EditInsight
| Item | Description |
|---|
| PR 1675808 | Fixed a problem where Revision Manager crashes when searching for broken Links on Hebrew OS. |
| PR 5991256 | Fixed a problem where you are unable to change Doc No and Rev No in Rev Mgr for certain parts. |
| PR 5941829 | Fixed a problem where revising Draft and FOP members are not updating everything in Rev Mgr |
| PR 5549874 | Fixed a problem where parts are shown as Designed when the Simplified parts option is used. |
| PR 6020447 | Fixed a problem where Rev Mgr gets in a loop when setting these files to Copy with Update Links |
| PR 6029411 | Fixed a problem that caused Solid Edge to crash when IPA on a part or assembly file from Draft. |
| PR 5706206 | Fixed a problem where Insight warnings appear for each file when saving assy. |
TopEditMaintenance Pack 2
Product: Solid Edge
Version: 100.00.02.07
Date: 03-Dec-2008
This Maintenance Pack can be installed on top of Version: 100.00.00.133 or 100.00.01.07.
Note: Maintenance Packs are all inclusive and can be installed on top of the base release or any released Maintenance Pack.
EditAssembly
| Item | Description |
|---|
| PR 5863961 | Fixed a problem where the first Undo in a sync part cancels current command |
| PR 6001319 | Fixed a problem where assembly features are not showing. |
| PR 6031604 | Fixed a problem where Solid Edge aborts in profile while working w/minimized ribbon |
| PR 6035914 | Fixed a problem where the Tooltips are missing in Mold Tooling |
| PR 6032872 | Fixed a problem where Solid Edge aborts while working on a feature pattern |
| PR 1668883 | Fixed a problem where moving a part causes duplicate occurrences to be created in Edgebar |
| PR 1685973 | Fixed a problem where you cannot locate top level assembly reference planes for angular relationships |
| PR 2110043 | Fixed a problem where Solid Edge aborts when deleting master part of pattern |
| PR 6045268 | Fixed a problem where an assembly is not found when opening a read-only upper-level FOA. |
| PR 6056820 | Fixed a problem where Solid Edge aborts when cursor is moved over failed relationships |
| PR 6057838 | Fixed a problem where Solid Edge aborts when opening a Part from Links dialog using “Open Source” |
| PR 6059361 | Fixed a problem where the angle value field appears on top of the group header bar. |
| PR 6003473 | Fixed a problem where moving faces in assembly results in an Operation Unsuccessful error. |
| PR 6031381 | Fixed a problem where using the persist relation option resulted in a system error |
| PR 6052910 | Fixed a problem where the provided Catia V5 file will not open in Solid Edge. |
| PR 6030433 | Fixed a problem where Solid Edge aborts after modifying a Wire Path name |
| PR 5980192 | Fixed a problem where properties of the supplied Assembly file do not get updated |
| PR 6022782 | Fixed a problem where window controls, zoom area/zoom tool/fit/pan are all dimmed out |
| PR 6015494 | Fixed a problem where physical motion aborts when trying to move a part that has no design body. |
| PR 6030940 | Fixed a problem where adding shaded view to quick access tool bar causes Solid Edge to abort |
| PR 2098270 | Fixed a problem where Solid Edge aborts when clicking white area of Display Configurations |
| PR 5984045 | Fixed a problem where a part does not go back to its original position after Undo. |
| PR 6026967 | Fixed a problem where the previous custom part inherits length of the most recently placed part. |
| PR 1662218 | Fixed a problem where selecting a part to replace in assembly results in a standard parts error |
| PR 6033504 | Fixed a problem where a revolved cutout is incorrectly removing material from the middle of the part |
| PR 5996010 | Fixed a problem where Cam relationships were failing |
| PR 5728763 | Fixed a problem where adding a single constraint to an Adjustable ASM causes other constraint failures |
EditPart
| Item | Description |
|---|
| PR 5782978 | Fixed a problem with Zoom Area and Variable table |
| PR 6020529 | Fixed a problem where Solid Edge aborts after selecting a model view in Pathfinder |
| PR 6033101 | Fixed a problem where Solid Edge hangs when saving or closing if ribbon is minimized |
| PR 2102531 | Fixed a problem where creating protrusion with an open profile on a tapered face fails |
| PR 1681561 | Fixed a problem where this pattern circle does not create a connect relationship |
| PR 6025683 | Fixed a problem where a diameter changed via Hole Options is not reflected in the action handle |
| PR 5771029 | Fixed a problem where constraining pattern sketch doesn't work properly. |
| PR 6034928 | Fixed a problem where Solid Edge aborts when undoing a PMI dimension in assembly |
| PR 1674428 | Fixed a problem where populating a member in a large FOP runs out of memory |
| PR 5988418 | Fixed a problem where you cannot select inferred ref planes on a CS when defining local symmetry |
| PR 6025644 | Fixed a problem where a locked group dimension could not be unlocked |
| PR 1695195 | Fixed a problem where you cannot Hide Previous Level when editing a part |
| PR 6002050 | Fixed a problem where you cannot create a perpendicular Helix |
| PR 6037567 | Fixed a problem where the full list of SE tutorials do not display |
| PR 6053835 | Fixed a problem where you cannot ground a hole feature using relate command |
| PR 6055115 | Fixed a problem where separating holes and then changing hole type causes an error |
| PR 1688195 | Fixed a problem where flattening a part results in the wrong cut size |
| PR 6044788 | Fixed a problem where accessing material table causes an abort |
| PR 2110210 | Fixed a problem where Solid Edge aborts when using "Go To" command |
| PR 1686604 | Fixed a problem where editing the supplied part with is not possible |
| PR 6049456 | Fixed a problem where the PromptBar does not remember font size between sessions |
| PR 6040150 | Fixed a problem where Solid Edge Tool Tips do not display properly with Smarteam |
| PR 5993498 | Fixed a problem where shaded highlight on Reference Planes stops working |
EditDraft
| Item | Description |
|---|
| PR 1684163 | Fixed a problem where you cannot copy and paste a view that contains coordinate dimension |
| PR 1535069 | Fixed a problem where you are unable to hide overridden edge segments |
| PR 1644606 | Fixed a problem where a Draft of a weldment Assembly is never up to date |
| PR 1686469 | Fixed a problem where Solid Edge aborts when editing a callout with property text |
| PR 1687099 | Fixed a problem where dimensions disappear when views are converted to 2D |
| PR 2044481 | Fixed a problem where you are unable to disconnect connected balloons |
| PR 6026209 | Fixed a problem where you are unable to apply a formula to or using a group dimension between bodies |
| PR 6038649 | Fixed a problem where flow-lines appear to go through the part in an exploded view |
| PR 6049636 | Fixed a problem where Solid Edge aborts when you select the wall of a hole with a hole callout |
| PR 6051792 | Fixed a problem where a Symmetric Diameter Dimension is not correct on a broken view |
| PR 1672422 | Fixed a problem where Solid Edge locks up while adding geometry on the working sheet |
| PR 2095507 | Fixed a problem where Fill is applied to an area outside the selection |
| PR 1694320 | Fixed a problem where Mirror command does not create connect constraints |
| PR 6042728 | Fixed a problem where select set is lost after a reset of a manipulation command |
| PR 1692306 | Fixed a problem where drawing views disappear after opening the file |
| PR 1682459 | Fixed a problem where the Solid Edge line width to ACAD color mapping doesn't work |
| PR 2108454 | Fixed a problem where the supplied Draft file would not open |
| PR 6026089 | Fixed a problem where Copy/Paste is creating an extra working sheets |
EditAPI
| Item | Description |
|---|
| PR 1690493 | Fixed a problem where the Custom Edgebar tab does not show up in a legacy addin |
| PR 1619947 | Fixed a problem where a call to SurfaceBoundaries.Add fails with 'type mismatch'. |
| PR 1691736 | Fixed a problem where Class DividedPart does not support Automation from V100 |
| PR 1663220 | Added a Block delete API. |
| PR 1675689 | Fixed a problem where 64-bit Solid Edge crashes in Models::AddSweptProtrusion |
| PR 4007438 | Fixed a problem where you were unable to create previews under properties via automation |
| PR 1693313 | Added the ability to add both a bitmap and text on UI buttons created by addins |
EditInsight
| Item | Description |
|---|
| PR 5991609 | Fixed a problem where you were unable to run View and Markup in 64-bit Solid Edge 2D Drafting (M) |
| PR 6045318 | Fixed a problem where LCA will not change “In work” back to “Available” |
| PR 1687267 | Fixed a problem where changing display configurations of subassembly will cause an abort |
| PR 6048198 | Fixed a problem where you are not able to select a zone on the File -> Open dialog |
TopEditMaintenance Pack 3
Product: Solid Edge
Version: 100.00.03.03
Date: 15-Jan-2009
This Maintenance Pack can be installed on top of Version: 100.00.00.133, 100.00.01.07, or 100.00.02.07.
Note: Maintenance Packs are all inclusive and can be installed on top of the base release or any released Maintenance Pack.
EditAssembly
| Item | Description |
|---|
| PR 1702197 | Animation Editor Timeline crashes Solid Edge |
| PR 1515114 | Pattern of a family member is not created correctly in this assembly |
| PR 1693966 | Out of context tube still updates after a Save As of the assembly |
| PR 2097365 | Variable renamed by user in V19 is not being displayed with variable table filter |
| PR 5918252 | Pattern is not updating in this file when Height is set to original value |
| PR 6018360 | Solid Edge hangs when changing placement options while placing angular relationships |
| PR 6061245 | Column designer is calculating the wrong area moments of inertia for I-beams |
| PR 6063339 | Opening a sub-assembly and then IPA into Part shows the wrong tree in Pathfinder |
| PR 6066064 | Cannot locate pattern along curve reference feature |
| PR 6073010 | Reorder not working when in place activated |
| PR 6075425 | No Cancel or Finish buttons were displayed in assembly feature pattern CommandBar. |
| PR 6075436 | Smart/Fast pattern buttons moving around in CommandBar. |
EditPart/Profile/Sheetmetal
| Item | Description |
|---|
| PR 1701884 | Solid Edge aborts when opening Advances Units in File Properties |
| PR 2111593 | Strange lines appear in this Draft file |
| PR 6027495 | Save As to ACIS is moving the version up 4 from the version selected |
| PR 6075309 | XpresRoute floating license not functioning properly |
| PR 6012839 | Simplify B-splines is not working in certain files |
| PR 2113007 | Solid Edge aborts when dismissing the default layer properties dialog |
EditDraft
| Item | Description |
|---|
| PR 1683725 | Unable to drive the position of a text profile with dimensions |
| PR 1698339 | Solid Edge aborts when fit is performed in this Draft file |
| PR 2070745 | The display of the value of a "Chamfer Dimension" is shifted |
| PR 2110529 | "Dimension value" is lying on top of "Dimension line" |
| PR 2111938 | ACAD multiple text color is not imported |
| PR 5938516 | Weld Symbol Properties dialog missing General tab at times |
| PR 6050476 | Layer names are mistranslating |
| PR 6064282 | Angular dimensions are incorrect when saving to AutoCAD |
TopEditMaintenance Pack 4
Product: Solid Edge
Version: 100.00.04.04
Date: 11-Feb-2009
This Maintenance Pack can be installed on top of Versions: 100.00.00.133, 100.00.01.07, 100.00.02.07, 100.00.03.03
Note: Maintenance Packs are all inclusive and can be installed on top of the base release or any released Maintenance Pack.
EditAssembly
| Item | Description |
|---|
| PR 2095252 | Files are not saved even though "save" is selected in Out of Memory dialog |
| PR 2111882 | Display of this assembly is wrong after opening and closing a part |
| PR 6082317 | Added functionality to IPA between mixed Traditional/Synchronous files |
| PR 1706324 | Cannot get a Tangent Relationship to behave as needed in this case |
| PR 1706787 | Changing scenery style in Explode Render Animate locks up Solid Edge |
| PR 6084919 | After adding an Assembly Feature, revolved cutout, a part within a subassembly is rotating |
| PR 6091109 | Assembly pattern no longer gets created in the correct position |
| PR 6097391 | Family of Assemblies properties are not saved when using file properties dialog |
| PR 6083619 | The provided assembly file will not open or will crash on open. |
EditPart/Profile/Sheet Metal
| Item | Description |
|---|
| PR 6048513 | Fit window is not centering the coordinate system when that is the only thing in the file |
| PR 1705364 | Unable to edit pattern a twice in this Synchronous part |
| PR 2113984 | The right side flange cannot be changed from a square to a round Bend-relief |
EditDraft
| Item | Description |
|---|
| PR 2113468 | Mirror sketch is not including horizontal/vertical relationships |
| PR 1707517 | After deleting a 2D Draft view, and saving the file, the Draft file cannot be reopened |
| PR 1698068 | Smart length dimensions cannot be changed in isometric views |
EditAPI
| Item | Description |
|---|
| PR 2112041 | "run-time error '13' type mismatch" error occurs in Synchronous Mode SDK |
| PR 6090872 | SEFacet fails to provide data for weldment files (.pwd) |
EditMold Tooling
| Item | Description |
|---|
| PR 6082126 | Parting Zone Dimension step hangs the process on Finish |
EditInsight
| Item | Description |
|---|
| PR 6094992 | Insight Cache Manager Tool is disappearing when adding files to cache |
TopEditMaintenance Pack 5
Product: Solid Edge
Version: 100.00.05.04
Date: 19-Mar-2009
This Maintenance Pack can be installed on top of Versions: 100.00.00.133, 100.00.01.07, 100.00.02.07, 100.00.03.03, 100.00.04.04
Note: Maintenance Packs are all inclusive and can be installed on top of the base release or any released Maintenance Pack.
EditAssembly
| Item | Description |
|---|
| PR 1700993 | Adjustable part with a value range doesn't work correctly |
| PR 1709984 | Non-reproducible Solid Edge ST crash – crashlog only |
| PR 6039860 | Constantly crashing after Solid Edge ST was installed |
| PR 6073633 | Menu flyouts added to QAT are blank in subsequent sessions |
| PR 6088990 | Editing assembly features has performance issues |
| PR 6087130 | Poor performance on open/show with patterns |
EditPart/Profile/Sheet Metal
| Item | Description |
|---|
| PR 1698243 | Image component not found in foundation license |
| PR 1708094 | It is no longer possible to copy a face in ST after installing MP3 |
| PR 2115603 | Cannot create the 'Contour Flange' w/chain opt @ "0" radius |
| PR 4680817 | Elements move when sketching a b-spline through key-points |
| PR 5936821 | When connecting a curve to a circle, the circle will move even when constrained |
| PR 2115753 | Solid Edge aborts after clicking Undo for a Copy to PMI action |
EditDraft
| Item | Description |
|---|
| PR 5858671 | Added a "Print as Black" option to “Save as PDF” |
| PR 2112299 | Cannot create the 'Section Only' with PMI model view. |
| PR 2116184 | Solid Edge aborts when changing dimension style options |
| PR 6088495 | Added support for "Export Annotation Color = -1" to retain annotation colors |
| PR 1628650 | Updating drawing views does not update the model display |
| PR 1709146 | Low Memory Warning when there appears to be plenty of virtual memory available |
| PR 1713403 | Replacing multiple occurrences of a block isn't working |
| PR 6103977 | Dimensions included from PMI Model Views should not be editable |
EditAPI
| Item | Description |
|---|
| PR 6088584 | Problem scanning links in assemblies using RevMan API |
EditInsight
| Item | Description |
|---|
| PR 1706912 | Edit Profile window pops up when standard parts are generated on Insight |
| PR 6095144 | Subsequent attempts to update a released assembly are successful after first failure |
| PR 1706501 | German Insight Version will not set the value for SEModel_Type |
| PR 6031094 | Copy Action is cleared when multiple items are selected and use Update Links option |
TopEditMaintenance Pack 6
Product: Solid Edge
Version: 100.00.06.03
Date: 15-Apr-2009
This Maintenance Pack can be installed on top of Versions: 100.00.00.133, 100.00.01.07, 100.00.02.07, 100.00.03.03, 100.00.04.04, 100.00.05.04
Note: Maintenance Packs are all inclusive and can be installed on top of the base release or any released Maintenance Pack.
EditAssembly
| Item | Description |
|---|
| PR 6097501 | Weld features failed each time the weldment assembly file is opened |
| PR 6101187 | SAT File Fails to Open |
| PR 1713572 | Reference Feature step selecting faces instead of entire feature |
| PR 6069017 | Assembly aborts during open |
| PR 6111867 | Unable to select individual sketch items when IPA into sub-assembly |
| PR 6119191 | Solid Edge hangs when opening this draft file |
| PR 6124646 | When translating Catia assemblies, curves, surf's, and solids are lumped together |
EditPart/Profile/Sheet Metal
| Item | Description |
|---|
| PR 6101666 | Running quickly out of memory on a 64 bit machine (SE 32 bit) |
| PR 5983131 | EMS Translator fails to import any file |
| PR 6119137 | Solid Edge (French) crashes when moving cursor over Quickbar Single/All button |
| PR 2118948 | File hangs at the splash screen |
| PR 6118550 | Mouse Scroll wheel on edit should adjust value of a round by 5% of initial value |
EditDraft
| Item | Description |
|---|
| PR 6123655 | can't extract bodies from MDT files |
| PR 1643072 | Unable to save a PDF file from Solid Edge to a path with a comma |
| PR 1694065 | A scaled dimension is no longer scaled after being re-attached |
| PR 1711103 | Solid Edge will export elliptical arcs as splines |
EditAPI
| Item | Description |
|---|
| PR 6098711 | SelectSetChanged events not being fired properly from select tool in Synchronous |
EditInsight/View & Markup
| Item | Description |
|---|
| PR 1720400 | Cannot open Parasolid files in View and markup with Hebrew filenames |
EditEmbedded Client
| Item | Description |
|---|
| PR 1678740 | The Dataset Keep Limit is ignored |
| PR 1691073 | if the query from Solid Edge contains an Integer LoV the search results are empty |
| PR 6023631 | When an assembly is viewed via PSE the assemblies JT override file is not used |
| PR 6125319 | JT overrides created by SEEC do not contain BREP data as specified in the ini file |
TopEditMaintenance Pack 7
Product: Solid Edge
Version: 100.00.07.04
Date: 20-May-2009
This Maintenance Pack can be installed on top of Versions: 100.00.00.133, 100.00.01.07, 100.00.02.07, 100.00.03.03, 100.00.04.04, 100.00.05.04, 100.00.06.03
Note: Maintenance Packs are all inclusive and can be installed on top of the base release or any released Maintenance Pack.
EditAssembly
| Item | Description |
|---|
| PR 1673892 | Selecting new base plane results in wrong orientation |
| PR 1706516 | Groove Weld missing in View & Markup |
| PR 6031625 | Solid Edge crashes when converting this assembly to a Synchronous Assembly |
| PR 6086371 | Solid Edge crashes when manipulating timeline pointer in the animation editor |
| PR 6109170 | Frequent crashes in ST, fixes added based on info from the crashlogs |
| PR 6124646 | Curves, Surfaces, and Solids are lumped together when importing a Catia file |
| PR 1698824 | Scroll to Part is not working correctly within a patterned sub-assembly |
| PR 1707765 | Unable to create small spur gear in Engineering Reference |
| PR 5993959 | Cannot generate Insight managed Standard Parts on 64bit client |
| PR 6129398 | Activating a part while moving another causes activated part to disappear |
| PR 1686303 | Variable values do not update if the linked excel file is missing |
| PR 6144280 | Virtual Component support commands are not enabled with Foundation |
| PR 6144967 | Can't Copy a Released file while IPA |
| PR 2072031 | Solid Edge is consuming more USER and GDI objects than needed |
| PR 6144353 | After creating a discrete list in the variable table, accessing the drop down list causes an abort |
EditPart/Profile/Sheet Metal
| Item | Description |
|---|
| PR 1715352 | Wrong hole information in hole table |
| PR 6112485 | Dynamic Edit of Rounds with the scroll wheel doesn't work correct for synchronous part |
| PR 6118906 | Unable to return to initial value when using mouse Scroll Wheel |
| PR 6152305 | Setting a value to 0 with the scroll wheel does not allow you to change it back up 5% |
| PR 2112417 | Can't select Datum Target and Datum Point with Move Dimension command |
| PR 6138584 | Failures adding constraints to sketches |
| PR 1705359 | Drawing views showing out of date, when no updates are needed |
| PR 6145040 | Variable Table crash |
| PR 1714042 | In a Synchronous part the position of patterned holes do not move correctly |
| PR 1714050 | Command p= base plane seems not to work, when pasting a sketch |
| PR 1720942 | Performance issue when saving a file after pasting elements from draft |
| PR 1714037 | Solid Edge crashes with SpaceNavigator |
EditDraft
| Item | Description |
|---|
| PR 1687315 | Graphical line type selection in Layer and Attribute mapping not correct |
| PR 1680872 | Modify balloon command does not set focus to balloon text |
| PR 6126396 | Draft aborts passing over lines with Edge Painter |
| PR 1703321 | Invisible Block labels are exported to DWG |
| PR 1703366 | Block Label angle is ignored on export to DWG |
| PR 6147727 | You cannot delete a balloon from graphic screen in the provided Synchronous part |
| PR 1712799 | Viewer data is incorrect |
| PR 1724661 | unable to open the provided Assembly file |
| PR 6140083 | Parts list is showing several parts that are not included in the List Control tab |
EditAPI
| Item | Description |
|---|
| PR 6081122 | Added Synchronous support in sereader.dll, sefacet.dll |
| PR 2091452 | Incorrect transform for highlight thru automation |
| PR 1711881 | Properties from Ideas JT are not going in sole edge sub assemblies |
| PR 2119076 | "ConstructionModel.Features" object is not obtained in the synchronous mode |
| PR 1681758 | Added additional support for adding multiple tabs and groups on a tab of the command ribbon, added support for check and radio buttons |
EditInsight/View & Markup
| Item | Description |
|---|
| PR 1716735 | Revision Manger generates wrong links to FOA/Variables |
| PR 1727458 | Can't replace Sync parts with Traditional parts in Revision Manager |
EditEmbedded Client
| Item | Description |
|---|
| PR 6125319 | JT over-rides created by SEEC do not contain BREP data as specified in the ini |
| PR 6067211 | FMS failures during AddToTeamcenter for the submitted dataset |
| PR 6138857 | AddToTeamcenter does not complete a resume import with Tc8.0.01 |
| PR 1680912 | The quantity of a non-graphical part is DELETED |
| PR 6049892 | SEEC structure editor will crash when switching between parts list and exploded |
| PR 6143758 | SEEC:AtT: Manage restart after system power failure |
| PR 1722104 | "Save as translated" does not work with model/draft file combinations |
| PR 6033016 | SEEC cache should not be case sensitive |
| PR 6150125 | SEEC TAL Update to Tc2007.1.7 Client Framework |
TopEditMaintenance Pack 8
Product: Solid Edge
Version: 100.00.08.03
Date: 18-Jun-2009
This Maintenance Pack can be installed on top of Versions: 100.00.00.133, 100.00.01.07, 100.00.02.07, 100.00.03.03, 100.00.04.04, 100.00.05.04, 100.00.06.03, 100.00.07.04
Note: Maintenance Packs are all inclusive and can be installed on top of the base release or any released Maintenance Pack.
EditAssembly
| Item | Description |
|---|
| PR 1725020 | Coordinate System loses parent if edited while hidden |
| PR 6003437 | View range is not correct in Sync Assembly, affects IPA |
| PR 1730742 | Part number is no longer in the pathfinder when imported from .xpk |
| PR 1724695 | Assembly sketch with Peer locate option turned on causes an abort |
EditPart/Profile/Sheet Metal
| Item | Description |
|---|
| PR 1713228 | Coordinate system name is not being updated correctly in pathfinder |
| PR 1723082 | Flat Pattern of a corner creates faces that are not at 90 degrees |
EditDraft
| Item | Description |
|---|
| PR 1687315 | Graphical line type selection in Layer and Attribute mapping not correct |
| PR 1707553 | Save failures in Draft |
| PR 2112712 | Fixed a problem with SE | The problem of the "saved setting" of draft callout |
| PR 2112715 | Preview of a "saved setting" Draft callout is wrong |
| PR 6055072 | Unable to select and modify dimensions in a Sync Part file |
| PR 6084779 | XLS object should respect fence select settings with fence delete |
| PR 1722079 | Draft files abort when opened with drawing views activated |
| PR 2121064 | Solid Edge crashed without creating a crashlog using Save As *.dxf |
| PR 6080344 | Property text not updating |
| PR 1725655 | Solid Edge crashed creating a draft quality View w/active parts for dimensioning |
EditAPI
| Item | Description |
|---|
| PR 1729751 | Fixed a problem with API | Problems in SE ST with Addin and Edgebar page |
EditInsight/View & Markup
| Item | Description |
|---|
| PR 1728732 | Unable to save a Synchronous file to German Insight Server |
| PR 1701613 | Russian file names not displayed in Russian Solid Edge Viewer |
| PR 1728953 | View & Markup does not show sheet tabs since MP6 |
| PR 1720400 | Cannot open Parasolid files with Hebrew filenames |
| PR 2123356 | .cfg files remain checked out in cache |
| PR 2123494 | Replace Duplicate Documents dialog appears from automation after setting DisplayAlerts off |
EditEmbedded Client
| Item | Description |
|---|
| PR 1707560 | "save as" does not change origination date on title block |
| PR 1729540 | Structure Editor does not clone the assembly provided |
| PR 1729792 | Multiple draft image files are generated in Solid Edge & Teamcenter |
| PR 6163450 | Fixed a problem with Structure Editor does not display non-graphic structure |
TopEditMaintenance Pack 9
Product: Solid Edge
Version: 100.00.09.04
Date: 29-Jul-2009
This Maintenance Pack can be installed on top of Versions: 100.00.00.133, 100.00.01.07, 100.00.02.07, 100.00.03.03, 100.00.04.04, 100.00.05.04, 100.00.06.03, 100.00.07.04, 100.00.08.03
Note: Maintenance Packs are all inclusive and can be installed on top of the base release or any released Maintenance Pack.
EditAssembly
| Item | Description |
|---|
| PR 1696220 | Moment of inertia (Izz) is incorrect |
| PR 1716353 | List both traditional and synchronous templates in the create in place dialog |
| PR 1723047 | When the Edit Table is opened no variables are listed in this assembly |
| PR 1724073 | Some corrupt files are wrongly recognized as academic |
| PR 6176542 | Solid Edge crashes when moving the mouse over a harness collector node |
| PR 6182029 | GDI fixes |
| PR 6182040 | Docking Pane Menu contains phantom entries |
| PR 6182893 | Solid Edge crashes on RMB click on line segment in XpresRoute |
| PR 6160128 | Smart face options go away when IPA from synchronous to Tradition and back |
| PR 6087964 | Assembly feature modifications shown in IPA Sync Part documents |
| PR 1736156 | Editing a frame to add segments results in the entire frame disappearing |
| PR 6188503 | Attempting to edit PMI in a shared file after an edit causes error and abort |
| PR 6188832 | Added the ability for the NX adapter to write the xml file to disk |
| PR 6189445 | Fasteners system parts do not move in synchronous environment |
EditPart/Profile/Sheet Metal
| Item | Description |
|---|
| PR 1733558 | No automatic connection to pattern circle is created |
| PR 6168468 | Simplified b-splines command workflow is not working |
| PR 6170573 | Fit is not working correctly when a Coordinate System is displayed |
| PR 1716100 | B-Splines in a flattened sheet metal instead of circles for countersink hole features |
| PR 1727290 | When placing a feature in a weldment (PWD) file, the affected parts will not highlight. |
| PR 1716100 | B-Splines in a flattened sheet metal instead of circles for countersink |
| PR 1722291 | Automatic document preservation for synchronous part results in an empty file |
| PR 1731318 | Flat Pattern from MP7 has geometry errors |
| PR 6183932 | Solid Edge crashed when trying to select an element from a sketch |
| PR 6190217 | Customer has random aborts on multiple machines, resolved based on provided crashlogs |
EditDraft
| Item | Description |
|---|
| PR 1713011 | Section view is not updating properly |
| PR 1735543 | Hole references are being deleted after setting |
| PR 6130685 | Solid Edge crashes when retrieving dimensions from a 2D view with a hole table in it |
| PR 6165420 | Solid Edge crashes when closing a file after editing balloon |
| PR 2114351 | a part edge cannot be displayed correctly using "Show Edges" |
| PR 6190581 | Sketch elements with annotation (text) are overlapped on export to dwg/dxf |
EditAPI
| Item | Description |
|---|
| PR 6173069 | Cannot turn off a balloon leader using API |
| PR 6168832 | Type lib missing for new button styles |
| PR 6169546 | Command tooltip can become the control caption |
| PR 6170564 | Call to GetVariables method fails for synchronous documents |
| PR 6176448 | document.AttachedProperties() is not working for synchronous document |
| PR 6059635 | Frame API problems, rotation angles, counts, and visibility |
EditInsight/View & Markup
| Item | Description |
|---|
| PR 5572121 | Parts always display as simplified when opened in View and Markup |
| PR 6174009 | Solid Edge aborts executing particular Insight workflow (PMI dimensions) |
| PR 1736499 | Wrong query result when the "SearchIn" definition contains a non existing site |
| PR 1737677 | Where Used query ignores specified DocLib Count in the registry |
| PR 1737833 | Insight Query with a question mark in the filename doesn't work |
| PR 6180206 | Moving an assembly from In Work to Available will not change associated draft files |
| PR 6191824 | Workflow allows duplicate doc name using the Save Copy As command |
EditEmbedded Client
| Item | Description |
|---|
| PR 1705408 | A new assembly created with NX Manager fails to open |
| PR 6159299 | Login through SEEC fails if subgroup name is specified |
| PR 6169714 | Open Version from Cache takes longer than expected |
| PR 6164362 | Solid Edge crashes when attempting file open when office 2007 has been installed |
| PR 6180370 | The component sequence number in the IXF file is not getting updated correctly |
| PR 6169714 | Open Version from Cache is taking longer than expected |
TopEditSolid Edge V20
EditUpdate 1
Product: Solid Edge
Version: 20.00.01.08
Date: 11-Oct-2007
This release of Solid Edge has been certified to run on the following:
- Windows XP Professional® operating system (32 bit or 64 bit)
- Windows Vista Business® or Vista Enterprise® operating system (32 bit or 64 bit)
- Internet Explorer 7.0 (IE 6.0 minimum)
This update can be instaled installed on top of Version: 20.00.00.96.
EditAssembly
| Item | Description |
|---|
| PR 5790158 | Fixed a problem with assembly feature performance. |
| PR 1601204 | Fixed a problem with file close. |
| PR 2085688 | Fixed a problem where Pathfinder takes a long time to rebuild during Close & Return. |
| PR 5790265 | Fixed a problem where Solid Edge hangs after viewing properties of a file in the Parts Library tab |
| PR 2085586 | Fixed a problem where a preview is not generated in FOA SaveMemberAs operation. |
| PR 5779779 | Fixed a problem that caused a crash in the Motion environment. |
| PR 5798459 | Fixed a problem that caused a crash in assemblies that have section views or simplified assemblies. |
| PR 2085626 | Fixed a problem that caused Solid Edge to crash. |
| PR 2084310 | Fixed a problem where using linkmgmt.txt file causes delays in open ASM file. |
| PR 5569116 | Fixed a problem where Save as Movie gives different results than from Solid Edge motor simulation. |
| PR 2085656 | Fixed a problem that caused a crash based on submitted crashlogs |
| PR 5792725 | Fixed a crash in the Assembly Pathfinder code. |
| PR 5791891 | Fixed a problem where the document formula is losing its information after creating drawing |
| PR 5784302 | Fixed a problem where parts uploaded, but assembly links are missing |
| PR 2084868 | Fixed a problem with cursor trails and zingers |
| PR 5778020 | Fixed a problem where xpk import needs to import multiple bodies of same file name into the same part |
| PR 5786782 | Fixed a problem where Catia V5 bulk VB translator options were incorrect |
| PR 1614185 | Fixed a problem where a CATIA V5 assembly does not import correctly |
| PR 2088783 | Fixed a problem where Solid Edge crashed after fastener application |
| PR 5782261 | Fixed a problem where parts were being inactivated after doing a show only on an zone definition |
EditPart
| Item | Description |
|---|
| PR 2086250 | Fixed a problem where a shortcut menu takes too long to come up in large part files |
| PR 5783402 | Fixed a problem where bend lines do not show up when part is modeled completely |
| PR 1599742 | Fixed a problem where bend disappears after adding a new Tab |
| PR 1582245 | Fixed a problem where flat pattern is not correct |
| PR 1586092 | Fixed a problem where sweep merges faces when using more then one cross section. |
| PR 5802014 | Fixed a problem with flat pattern |
| PR 2086252 | Fixed a problem were hole feature's response time is too slow on large parts |
| PR 1595081 | Fixed a problem where bend radius cannot be changed after a convert to sheet metal |
| PR 1597527 | Fixed a problem where bend relief returns in the flatten model when using a move face |
| PR 5811217 | Fixed a problem where resizing ref planes in child gives wrong member geometry |
| PR 2088098 | Fixed a problem where executing "GO TO" causes Solid Edge to crash |
| PR 5798598 | Fixed a problem where the Lightworks Framework Application Failed while launching Material Table |
| PR 1600030 | Fixed a problem where Save As Flat command produces an empty DXF file |
| PR 5825162 | Fixed a problem where Flange sizes do not match value entered by user. |
EditDraft
| Item | Description |
|---|
| PR 5790010 | Fixed a problem where hidden edges toggles are not working for pictorial or ortho views in wizard. |
| PR 5727318 | Fixed a problem that caused a crash when selecting callouts |
| PR 5773094 | Fixed a problem where a symbol is clipped by a Drawing View |
| PR 5801445 | Fixed a problem where annotations and geometry do not translate to Solid Edge |
| PR 5812763 | Fixed a problem where Solid Edge aborts when invoking Property Manager |
| PR 2087835 | Fixed a problem where AutoCAD file with Japanese characters do not open in Wizard |
| PR 5815198 | Fixed a problem where a Drawing file can no longer be opened in V20 |
| PR 5815982 | Fixed a problem where SE crashed when try to move views after unselecting excel table. |
| PR 1614861 | Fixed a problem with Callout is not correct on countersink holes. |
EditAPI
| Item | Description |
|---|
| PR 5806718 | Added an API from CADPartner to aid the Tc data prep tools with STD parts |
| PR 5803835 | Added automation method to get "Created" & "Last Saved" versions |
| PR 1614401 | Fixed a problem where Macros don't run under Vista |
| PR 2086297 | Fixed a problem where the value of custom property is not displayed on assembly path finder. |
EditInsight
| Item | Description |
|---|
| PR 5795995 | Fixed a problem where files should not be checked out |
| PR 5796968 | Fixed a problem where FTP server links on the Tech Support Help menu pop up a Server Login dialog |
| PR 5800304 | Fixed a problem where Web Parts can not find 'Edge.exe' |
| PR 5800204 | Fixed a problem where Solid Edge aborts when opening subasm via web parts page |
| PR 5806293 | Fixed a problem where RevMan deletes part file if files are renamed the same. |
| PR 2078513 | Fixed a problem where Solid Edge can not create a new folder in Japanese OS |
| PR 1607695 | Fixed a problem where Redefine links do not work |
| PR 2086755 | Fixed a problem where Japanese file names are garbled in View & Markup |
| PR 2060477 | Fixed a problem where Customers cannot save SE file using Japanese name as PCF. |
TopEditUpdate 2
Product: Solid Edge
Version: 20.00.02.03
Date: 19-Nov-2007
This release of Solid Edge has been certified to run on the following:
- Windows XP Professional® operating system (32 bit or 64 bit)
- Windows Vista Business® or Vista Enterprise® operating system (32 bit or 64 bit)
- Internet Explorer 7.0 (IE 6.0 minimum)
This Update can be installed installed on top of Version: 20.00.00.96, or 20.00.01.08.
EditAssembly
| Item | Description |
|---|
| PR 5827283 | Fixed a problem where Explode Config used for ERA goes bad after adding a motor and entering animation |
| PR 2088108 | Fixed a problem where Physical Props are not reporting unassigned densities correctly selected parts. |
| PR 1580928 | Fixed a problem with the positioning of hole assembly feature. |
| PR 5588898 | Fixed a problem where a section view is causing file size increase after a save. |
| PR 2088423 | Fixed a problem where the assembly ribbon flickering when user is Closing & Returning to an expanded asm. |
| PR 1609662 | Fixed a problem where the user is unable to delete pipe occurrences. |
| PR 5815906 | Fixed a problem where Solid Edge is crashing when you try to save out an empty simplified assembly. |
| PR 2083366 | Fixed a problem where Section cut faces are not updating properly. |
| PR 5828903 | Fixed a problem where you can not select a silhouette edge of one part. |
| PR 5765837 | Fixed a problem where Export to JT did not honor Solid Edge Occurrence Properties |
| PR 1579648 | Fixed a problem where entries from custom.xml are not used and cannot be deleted |
| PR 5831498 | Fixed a problem with assembly file-open performance |
EditPart
| Item | Description |
|---|
| PR 2089001 | Fixed a problem where editing a cutout profile and finishing without changes results in a recompute |
| PR 5822624 | Fixed a problem where you are unable to get a contour flange around an internal octagon |
| PR 5747437 | Fixed a problem where a symmetry relationship not be created |
| PR 1624643 | Fixed a problem where German Locale shows read/write fields incorrectly in variable table |
EditDraft
| Item | Description |
|---|
| PR 1617165 | Fixed a problem where sheets are missing when using Save as DXF |
| PR 5822573 | Fixed a problem where you are unable to Copy/Move multiple elements in Draw in View. |
| PR 5827506 | Fixed a problem where this Draft file does not open. |
| PR 5831180 | Fixed a problem where you are unable to create a PDF dataset. |
| PR 5835355 | Fixed a problem where this Draft file does not open. |
| PR 1619145 | Fixed a problem where bend table column headers are not displayed. |
| PR 5622219 | Fixed a problem where dangling dimension have the wrong value when reattached |
EditInsight
| Item | Description |
|---|
| PR 5832513 | Fixed a problem where there was no Obsolete option in the function "Move documents through workflow" |
| PR 5831605 | Fixed a problem where you are unable to display a pcf file in the View and Markup environment. |
TopEditUpdate 3
Product: Solid Edge
Version: 20.00.03.03
Date: 12-Dec-2007
This release of Solid Edge has been certified to run on the following:
- Windows XP Professional® operating system (32 bit or 64 bit)
- Windows Vista Business® or Vista Enterprise® operating system (32 bit or 64 bit)
- Internet Explorer 7.0 (IE 6.0 minimum)
This Update can be instaled installed on top of Version: 20.00.00.96, 20.00.01.08, or 20.00.02.03.
EditAssembly
| Item | Description |
|---|
| PR 1619968 | Fixed a problem where assembly files would not open. |
| PR 1605721 | Fixed a problem where a Fastener System cannot be deleted |
| PR 5858754 | Fixed a problem that caused Solid Edge to crash based on submitted crashlogs |
| PR 1622291 | Fixed a problem where native STEP file import is missing sub asm names |
EditPart
| Item | Description |
|---|
| PR 2089934 | Fixed a problem where Solid Edge fails to execute in a timely manner using a License File list. |
| PR 1623107 | Fixed a problem with Wrong result in flatten in V19 |
EditDraft
| Item | Description |
|---|
| PR 5849264 | Fixed a problem where the "last printed date" property is not updating before printing. |
| PR 1625754 | Fixed a problem where Solid Edge is crashing while zooming in and out of filled box in draft |
| PR 1625692 | Fixed a problem where Hebrew text in PMI callout is reversed ABCD=DCBA |
| PR 1624209 | Fixed a problem where 64bit Solid Edge crashes when updating drawing views. |
| PR 5841792 | Fixed a problem where Parts List and Auto ballooning is not updating properly. |
| PR 1627832 | Fixed a problem where the submitted Draft file aborts on open. |
TopEditUpdate 4
Product: Solid Edge
Version: 20.00.04.04
Date: 24-Jan-2008
This release of Solid Edge has been certified to run on the following:
- Windows XP Professional® operating system (32 bit or 64 bit)
- Windows Vista Business® or Vista Enterprise® operating system (32 bit or 64 bit)
- Internet Explorer 7.0 (IE 6.0 minimum)
This Update can be instaled installed on top of Version: 20.00.00.96, 20.00.01.08, 20.00.02.03, or 20.00.03.03.
EditAssembly
| Item | Description |
|---|
| PR 1612509 | Fixed a problem with line creation in XpresRoute on simplified parts |
| PR 1620041 | Fixed a problem where Frame components are surfaces after Save As |
| PR 5856651 | Fixed a problem where JT file open is slow |
| PR 5871038 | Fixed a problem where Solid Edge crashed when adding parts to an existing assembly pattern |
| PR 5867700 | Fixed a problem where Solid Edge crashed after creating a swept protrusion and saving the assembly. |
EditPart
| Item | Description |
|---|
| PR 1629172 | Fixed a problem where Solid Edge is crashing when executing Bluesurf command |
| PR 5861912 | Fixed a problem where SEPartx.ocx does not work in Excel |
| PR 1623107 | Fixed a problem where using flat pattern in V19 flattens the model but "removes" one of the flanges |
| PR 1633469 | Fixed a problem where the Sphere color changes when zooming in. |
| PR 1618523 | Fixed a problem where Solid Edge crashes when include is used in 2 open assemblies. |
EditDraft
| Item | Description |
|---|
| PR 5862532 | Fixed a problem where a DWG file created from Solid Edge is not opening in AutoCAD |
| PR 5814536 | Fixed a problem where a threaded finite hole does not show thread lines in hidden orientation. |
EditAPI
| Item | Description |
|---|
| PR 5855377 | Fixed a problem with GetSaveAsFileName() Enhancement Request where the user can now obtain the default filters used by the command by passing in "default" or "default_XXX" where XXX is par, asm, dft, pwd, psm or familyasm. If the simple "default" is supplied, Edge will get the appropriate filter set for the active document or a part document if no document is active. |
EditInsight
| Item | Description |
|---|
| PR 1634261 | Fixed a problem where files are left checked out after editing. |
| PR 5867701 | Fixed a problem where Solid Edge search is not finding all documents when Look in contains multiple paths |
TopEditUpdate 5
Product: Solid Edge
Version: 20.00.05.05
Date: 05-Mar-2008
This release of Solid Edge has been certified to run on the following:
- Windows XP Professional® operating system (32 bit or 64 bit)
- Windows Vista Business® or Vista Enterprise® operating system (32 bit or 64 bit)
- Internet Explorer 7.0 (IE 6.0 minimum)
This Update can be instaled installed on top of Version: 20.00.00.96, 20.00.01.08, 20.00.02.03, 20.00.03.03, or 20.00.04.04.
EditAssembly
| Item | Description |
|---|
| PR 1560877 | Fixed a problem where movement simulation via a variable makes relationships fail. |
| PR 1627326 | Fixed a problem where the user is unable to create Fastener systems. |
| PR 5883274 | Fixed a problem were the Assembly Select Tool is not selecting nearest geometry first |
| PR 1620155 | Fixed a problem where the focus is not set to input box with Angle Relations |
| PR 1634626 | Fixed a problem where you are not prompted to save when closing asm after editing parts. |
| PR 5794020 | Fixed a problem where editing an Engineering Reference component results in an error |
| PR 5882948 | Fixed a problem where an imported NX assembly is missing parts |
| PR 1635879 | Fixed a problem where Automatic explode is not working correctly |
| PR 1636815 | Fixed a problem where exporting an assembly with adjustable parts results in errors |
| PR 2089145 | Fixed a problem where you could not save a Display Configurations in an older file. |
| PR 5893065 | Fixed a problem where Solid Edge crashes when you mouse over PathFinder Model Views in assembly |
| PR 2091832 | Fixed a problem where opening a JT assembly aborts |
| PR 1617474 | Fixed a problem where Save As causes an Include - link to be deleted in the new assy |
| PR 1607483 | Fixed a problem where a pattern applied to adjustable part does not follow when part is rotated. |
| PR 5710806 | Fixed a problem where clicking on "+" is not downloading the sub-assembly files to cache. |
| PR 5445638 | Fixed a problem where include creates results in the incorrect location. |
| PR 5861000 | Fixed a problem where a section view is not getting applied properly. |
| PR 5214177 | Fixed a problem where making a subasm adjustable places patterns in wrong location |
EditPart
| Item | Description |
|---|
| PR 1613317 | Fixed a problem where a drawing view will not update. |
| PR 1400919 | Fixed a problem with conflicting relationships when using Dimension Axis |
| PR 5849418 | Fixed a problem where editing protrusion size twice in a row results in an incorrect solve. |
| PR 2072611 | Fixed a problem where a sheet metal model will not unbend. |
| PR 2091083 | Fixed a problem where the a converted sheet metal file crashes after Undo. |
| PR 2090732 | Fixed a problem where a flange will not change to a round Bend-relief |
| PR 5892313 | Fixed a problem with Opening DM Documents in V20 give inappropriate messages |
| PR 2089507 | Fixed a problem where a Flange is not created on outside of profile |
| PR 2090039 | Fixed a problem where Trim failed after the first trim on a B-Spline with a PointON constraint |
| PR 1641535 | Fixed a problem where Ideas TDM Migration is very slow |
EditDraft
| Item | Description |
|---|
| PR 5875995 | Fixed a problem where assembly section views do not display. |
| PR 1636828 | Fixed a problem where property text misinterpreting a date format as number format. |
| PR 5827906 | Fixed a problem where sheet bodies are not shown in drawing views when a section is applied. |
| PR 5853510 | Fixed a problem where you are unable to set Annotation text size for a style. |
| PR 5895624 | Fixed a problem where property text to non-existent named reference is showing error. |
| PR 5864209 | Fixed a problem where dimensions sometimes detach on document transition or save. |
| PR 1640177 | Fixed a problem where textbox attributes are not correctly copied in copy/paste |
| PR 1641373 | Fixed a problem where Solid Edge crashes when opening the supplied DXF file |
| PR 5901150 | Fixed a problem where geometry is missing in an imported DXF created from NX |
| PR 2094827 | Fixed a problem where the display of Tab char. in textbox is different in Windows2000 and WindowsXP. |
EditAPI
| Item | Description |
|---|
| PR 5814912 | Fixed an indexing problem with the API for the Configurations Collection |
EditInsight
| Item | Description |
|---|
| PR 5593456 | Fixed a problem where TAB and ENTER is not working correctly in property manager. |
| PR 1639321 | Fixed a problem where Search results display the wrong value for user defined type number |
| PR 5880790 | Fixed a problem where the Yes/No columns in Search results do not display values |
| PR 5896983 | Fixed a problem that was causing Solid Edge to crash based on auto submitted crashlogs. |
| PR 1642257 | Fixed a problem where the wrong revision and names are generated for a Asm |
| PR 1634422 | Fixed a problem where subassemblies are not carried over to a new revision. |
| PR 1639853 | Fixed a problem where User A can overwrite a modification by User B |
| PR 1585130 | Fixed a problem where the Document number is not correctly managed by Insight in Italian version |
| PR 1626882 | Fixed a problem where you are unable to revise or copy managed files using Revision Manager |
| PR 5908397 | Fixed a problem with Revision manager operations make linked files read only |
| PR 1645360 | Fixed a problem where opening SE file from the SharePoint interface is returning Insight error |
TopEditUpdate 6
Product: Solid Edge
Version: 20.00.06.06
Date: 07-May-2008
This release of Solid Edge has been certified to run on the following:
- Windows XP Professional® operating system (32 bit or 64 bit)
- Windows Vista Business® or Vista Enterprise® operating system (32 bit or 64 bit)
- Internet Explorer 7.0 (IE 6.0 minimum)
This Update can be instaled installed on top of Version: 20.00.00.96, 20.00.01.08, 20.00.02.03, 20.00.03.03, 20.00.04.04, or 20.00.05.05.
EditAssembly
| Item | Description |
|---|
| PR 1633466 | Fixed a problem where the Adjustable Part dialog appears only once |
| PR 1642090 | Fixed a problem where tubes are not updating properly inside a FOA file. |
| PR 5918490 | Fixed a problem where Assembly features are taking a long time to create/update in this file. |
| PR 2090861 | Fixed a problem where Solid Edge aborts when double clicking on an X_T file on desktop |
| PR 1648907 | Fixed a problem where the Preview is not updating in Property Manager |
EditPart
| Item | Description |
|---|
| PR 5875755 | Fixed a problem where a large Step File is not translating properly |
| PR 5864044/2095252 | Fixed a problem where files are not saved even though "save" is selected on the memory warning dialog |
| PR 5864044/1628784 | Fixed a problem where some features are not updating after Editing Profile |
| PR 1626397 | Fixed a problem where Solid Edge crashes when editing a pattern. |
| PR 5923272 | Fixed a noticeable performance difference between V18 and V20 when creating an extrusion in-place active |
| PR 5796903 | Fixed a problem where Solid Edge would crash when deleting a line from profile in a Tab. |
| PR 5876754 | Fixed a problem where Solid Edge was taking a long time to validate/checkout a second and third license |
| PR 2084055 | Fixed a problem where resizing a hole in the is file caused Solid Edge to lock up. |
| PR 1637173 | Fixed a problem where an Unbend feature modifies existing tabs located in a bend zone |
| PR 1619304 | Fixed a problem where Solid Edge closes after editing a text profile within a cutout. |
| PR 5852431 | Fixed a problem where tab creation results in multiple faces. |
EditDraft
| Item | Description |
|---|
| PR 5901846 | Fixed a problem where Solid Edge crashed when creating Detail View |
| PR 5911708 | Fixed a problem where a Hole callout was wrong in section view. |
| PR 1651030 | Fixed a problem where a User table was corrupted after rows were deleted. |
| PR 1638310 | Fixed a problem where DWG and DXF files were not generated correctly. |
| PR 1635223 | Fixed a problem where a drawing view of a model with simplified subassemblies did not update correctly |
| PR 1640473 | Fixed a problem where copying a drawing view w/assembly overrides caused subsequent views to be placed incorrectly. |
| PR 5930003 | Fixed a problem where Solid Edge was crashing when trying to create a section view from a detail view. |
| PR 5932877 | Fixed a problem where a drawing view of an Assembly created erroneous geometry |
| PR 1646959 | Fixed a problem where revolved section views became corrupt after an independent detail view was deleted. |
| PR 1645262 | Fixed a problem where copy/paste between documents was very slow |
| PR 2097038 | Fixed a problem where dimension values in this file displayed incorrectly |
EditInsight
| Item | Description |
|---|
| PR 5831605 | Fixed a problem where a PCF file would not display in View and Markup |
| PR 1649542 | Fixed a problem where the BOM WebPart doesn't properly export text which contains a comma. |
TopEditUpdate 7
Product: Solid Edge
Version: 20.00.07.04
Date: 13-Jun-2008
This release of Solid Edge has been certified to run on the following:
- Windows XP Professional® operating system (32 bit or 64 bit)
- Windows Vista Business® or Vista Enterprise® operating system (32 bit or 64 bit)
- Internet Explorer 7.0 (IE 6.0 minimum)
This Update can be instaled installed on top of Version: 20.00.00.96, 20.00.01.08, 20.00.02.03, 20.00.03.03, 20.00.04.04, 20.00.05.05, or 20.00.06.06.
EditAssembly
| Item | Description |
|---|
| PR 1658066 | Fixed a problem with memory allocations during IPA and Close & Return |
| PR 1659929 | Fixed a problem where you are unable to save image of exploded views w/same light conditions as ASM |
| PR 1620125 | Fixed a problem with locate order for connect relationship. |
| PR 5937925 | Added support for opening CATIA V5 R18 files via the Catia V5 translator. |
| PR 1644714 | Fixed a problem where relationships are failing when switching between members of a FOA file. |
| PR 1632100 | Fixed a problem with assembly feature performance using suppress/unsuppress |
| PR 5827928 | Fixed a problem where Piping Route options dialog takes an excessive time to display on VISTA |
| PR 5833436 | Fixed a problem where Solid Edge aborts when the EdgeBar is undocked then docked. |
| PR 1621771 | Fixed a problem with the mate relationship crashing Solid Edge after FlashFit |
| PR 5966107 | Fixed a problem where Solid Edge aborted based on automatically submitted crashlogs |
| PR 1652907 | Fixed a problem where disperse is not forwarding adjustable part definitions to the top-level assembly. |
EditPart
| Item | Description |
|---|
| PR 1571394 | Fixed a problem where a text profile within sketch does not work with a certain font. |
| PR 1558495 | Fixed a problem where some letters cannot be located in text profile. |
| PR 5956704 | Fixed a problem where Solid Edge crashes using Material Table after installing AutoCAD 2009. |
| PR 1662358 | Fixed a problem where maintain holes in flat pattern doesn't work as expected |
| PR 2100604 | Fixed a problem where Solid Edge crashed when deleting a section view from the part pathfinder. |
| PR 2096943 | Fixed a problem with Dimensions are displaying as a sick dimension |
EditDraft
| Item | Description |
|---|
| PR 5946329 | Fixed a problem where you cannot enter zero for break line length in V20. |
| PR 1630475 | Fixed a problem where rotated views are not correctly translated to DWG |
| PR 5907488 | Improved memory handling when updating shaded views in Draft. |
| PR 1633647 | Fixed a problem where drawing views are not being marked as out-of-date after Move |
| PR 5965666 | Fixed a problem where the Click Copy button on PropText dialog caused a low memory warning. |
EditInsight
| Item | Description |
|---|
| PR 5944321 | Fixed a problem where Solid Edge crashed when closing a file after applying a style. |
| PR 1662455 | Fixed a problem where canceling a create in place adds the document anyway. |
| PR 1656008 | Fixed a problem where a FOA cannot be opened directly from Internet Explorer 7 |
TopEditUpdate 8
Product: Solid Edge
Version: 20.00.08.04
Date: 23-Jul-2008
This release of Solid Edge has been certified to run on the following:
- Windows XP Professional® operating system (32 bit or 64 bit)
- Windows Vista Business® or Vista Enterprise® operating system (32 bit or 64 bit)
- Internet Explorer 7.0 (IE 6.0 minimum)
This Update can be instaled installed on top of Version: 20.00.00.96, 20.00.01.08, 20.00.02.03, 20.00.03.03, 20.00.04.04, 20.00.05.05, 20.00.06.06, or 20.00.07.04.
EditAssembly
| Item | Description |
|---|
| PR 5847501 | Fixed problem that caused an abort when applying an angular relationship |
| PR 5906839 | Fixed a problem where the Assembly Pattern command is creating extra occurrences |
| PR 1665948 | Fixed a problem where parts were not listed in Edgebar and cannot be deleted |
| PR 2098485 | Fixed a problem that caused an abort when opening Physical Property Manager |
| PR 1625279 | Fixed a problem where Interpart-Manager lists the wrong information |
| PR 2097711 | Fixed a problem where the mass of physical properties is not correct |
| PR 1664488 | Fixed a problem where you cannot generate a standard part |
| PR 5969985 | Fixed a problem that caused an abort based on auto-submitted crashlogs |
| PR 2097514 | Fixed a problem where FlashFit surfaces are locating in incorrect order |
| PR 5971808 | Fixed a problem that caused unpredictable arc dimensions in XpresRoute |
| PR 5972224 | Fixed a problem where helical spur gears are being created incorrectly |
| PR 1623215 | Fixed a problem where the "Edit Adjustable Part" command was missing in Solid Edge Foundation. |
| PR 5728742 | Fixed a problem where you cannot create a simplified assembly |
| PR 5984610 | Fixed a problem where Frames cannot be seen in a simplified assembly saved as a part. |
| PR 2098304 | Fixed a problem where editing a tube radii returns to default after Transfer |
| PR 5964249 | Fixed a problem with performance and memory issues editing and updating a weldment. |
| PR 5784262 | Fixed a problem with When placing simplified assy, components disappear after dragging into graphics |
| PR 1662218 | Fixed a problem with a Standard parts error, unsupported format of a non-CAD document |
| PR 1668572 | Fixed a problem where you are unable to change frame end conditions to butt2 |
| PR 2090384 | Fixed a problem where Save As RTF format garbles Japanese text |
| PR 5988608 | Fixed problems with assembly feature performance. |
EditPart
| Item | Description |
|---|
| PR 2102153 | Fixed a problem that caused an abort when setting the maximum density is 0.5 |
| PR 5825612 | Fixed a problem where UG assembly file does not translate correctly in Solid Edge V20. |
| PR 1662715 | Fixed a problem that caused an abort after update all. |
| PR 2101442 | Fixed a problem where you cannot create Contour Flange when setting Bend radius=0mm |
| PR 1672651 | Fixed a problem where you are unable to flatten a sheet metal part with a chamfer |
| PR 1661859 | Fixed a problem where Model view takes a very long time in View and Markup. |
| PR 5785898 | Fixed a problem where Solid Edge aborts opening a Parasolid file. |
| PR 1668264 | Fixed a problem with open JT file causing duplicate the file names. |
EditDraft
| Item | Description |
|---|
| PR 1639511 | Fixed a problem where dimensions are not correct when opening a DXF file. |
| PR 2098559 | Fixed a problem where dimensions are missing in imported dxf |
| PR 5957864 | Fixed a problem that caused an abort during create/update of a view with a PMI model view. |
| PR 5786340 | Fixed a problem where the Elements on the Auto Hide layer are being exported as visible |
| PR 2101520 | Fixed a problem where views with old tubes failed to place correctly. |
| PR 2103451 | Fixed a problem where a "Surface Texture Symbol" cannot be exported to DXF. |
| PR 2101453 | Fixed a problem where dimension and lines overlap when exported to DXF |
| PR 5802490 | Fixed a problem where AutoCAD Ft-In dimensions do not translate properly |
| PR 5991964 | Fixed a problem with "Error: no reference" displayed in callouts linked to missing properties |
EditInsight
| Item | Description |
|---|
| PR 1662107 | Fixed a problem where create in place does not warn user in certain scenarios |
| PR 5941878 | Fixed a problem where a new part is left in a checked out state when draft is checked in and closed |
| PR 1637467 | Fixed a problem where Version comments (Edit Profile) are not listed in version history in SharePoint |
| PR 5957759 | Fixed a problem where older files from cache overwrite newer files on Insight/SharePoint server |
EditAPI
| Item | Description |
|---|
| PR 5979480 | Fixed a problem where DraftDataAPI.dll had a dependency on SEAlloc.dll |
| PR 1615362 | Fixed a problem with API-open/close-events causing corrupt pointers |
| PR 5959193 | Fixed a problem with the compatibility of SEPartReader.DLL on Vista |
TopEditUpdate 9
Product: Solid Edge
Version: 20.00.09.03
Date: 27-Aug-2008
This release of Solid Edge has been certified to run on the following:
- Windows XP Professional® operating system (32 bit or 64 bit)
- Windows Vista Business® or Vista Enterprise® operating system (32 bit or 64 bit)
- Internet Explorer 7.0 (IE 6.0 minimum)
This Update can be instaled installed on top of Version: 20.00.00.96, 20.00.01.08, 20.00.02.03, 20.00.03.03, 20.00.04.04, 20.00.05.05, 20.00.06.06, 20.00.07.04, or 20.00.08.04.
EditAssembly
| Item | Description |
|---|
| PR 1676717 | Fixed a problem where Rack and Pinion Gears produce the wrong results. |
| PR 1641424 | Fixed a problem where Solid Edge was crashing when working with zones. |
| PR 6006563 | Fixed a problem where a specific Assembly file aborts on save. |
| PR 2105941 | Fixed a problem where the "Explode" command caused Solid Edge to crash. |
| PR 5874510 | Fixed a problem where Solid Edge entered into a Not Responding state while simplifying an assembly. |
| PR 5899813 | Fixed a problem where Solid Edge was aborting when editing a weld label. |
| PR 5872719 | Fixed a problem where editing a Stitch Weld assembly feature causes an abort. |
| PR 1672958 | Fixed a problem saving a simplified assembly in a folder where there is an existing file with the same name. |
| PR 2082240 | Fixed a problem where "Export Display Only" is not working when edit into sub-assembly |
| PR 5842365 | Fixed a problem where saved configurations are lost converting an assembly into an FOA. |
| PR 1674763 | Fixed a problem where match coordinate system doesn’t locate the CS when assembly features exist |
| PR 1599941 | Fixed a problem where threaded holes in assembly have incorrect diameters. |
| PR 2104933 | Fixed a problem where you can not include normal to face using fence select |
| PR 5950256 | Fixed a problem where Solid Edge aborts when saving family of assembly file. |
| PR 5943101 | Fixed a problem where Solid Edge crashes when opening JT file created by IDEAS |
| PR 5902637 | Fixed a problem where Solid Edge crashes when opening a part from draft and in assembly. |
| PR 5782973 | Fixed a problem where IDEAS data Migration fails to migrate drawing, and locks up the process |
EditPart
| Item | Description |
|---|
| PR 5921066 | Fixed a problem where Hole callouts for patterned counterbore and countersink holes are wrong |
| PR 2100883 | Fixed a problem where a round disappears when part is recomputed |
| PR 5844833 | Fixed a problem where a Sheet metal part is displaying the wrong angle in draft. |
| PR 6000242 | Fixed a problem where you are unable to import an STL file. |
EditDraft
| Item | Description |
|---|
| PR 1656622 | Fixed a problem where an Image is disappearing after pasting. |
| PR 1585174 | Fixed a problem where connecters in a Block are not correct. |
| PR 5982657 | Fixed a problem where a Microstation 2-D dgn file causes Solid Edge to crash |
| PR 2103557 | Fixed a problem where Blocks are not exporting to dxf on Japanese XP. |
| PR 1670678 | Fixed a problem where Solid Edge Line width to ACAD Color Mapping is not working for dimensions |
| PR 6000905 | Fixed a problem where opening DGN file causes Solid Edge to abort |
| PR 5971763 | Fixed a problem where you are unable to Copy/Move multiple elements in Draw in View. |
| PR 1619152 | Fixed a problem where a drawing border is not saved out in pdf |
| PR 5841236 | Fixed a problem where zooming with Ctrl+RMB is deselecting geometry |
| PR 1616825 | Fixed a problem where hitting 5 on Numeric Pad selects Endpoint |
| PR 5994535 | Fixed a problem where drawing views are not exported using "Translate drawing views as blocks" |
| PR 2104940 | Fixed a problem where hidden layers were not hidden after drawing view converted to 2D. |
EditInsight
| Item | Description |
|---|
| PR 1675808 | Fixed a problem where search For Broken Links crashes on Hebrew OS. |
| PR 5991256 | Fixed a problem where you are unable to change Doc No and Rev No in Rev Mgr for certain parts. |
| PR 5549874 | Fixed a problem where parts are shown as Designed even though use Simplified parts option is used. |
| PR 5706206 | Fixed a problem where Insight warnings appear for each file when saving assy. |
TopEditUpdate 10
Product: Solid Edge
Version: 20.00.10.03
Date: 24-Oct-2008
This release of Solid Edge has been certified to run on the following:
- Windows XP Professional® operating system (32 bit or 64 bit)
- Windows Vista Business® or Vista Enterprise® operating system (32 bit or 64 bit)
- Internet Explorer 7.0 (IE 6.0 minimum)
This Update can be installed on top of Version: 20.00.00.96, 20.00.01.08, 20.00.02.03, 20.00.03.03, 20.00.04.04, 20.00.05.05, 20.00.06.06, 20.00.07.04, 20.00.08.04, or 20.00.09.03.
EditAssembly
| Item | Description |
|---|
| PR 5737340 | Fixed a problem that caused a circular dependency error using FlashFit. |
| PR 1649779 | Fixed a problem where the DELETE key in assembly does not work at times. |
| PR 2076104 | Fixed a problem where in the user is unable to auto-restore a backed up file. |
| PR 1628066 | Fixed a problem with FOA and Assembly Features |
| PR 2088091 | Fixed a problem where it takes too much time and memory to update the "Physical Properties” |
| PR 2085635 | Fixed an abort from data submitted via a crashlog. |
| PR 6022024 | Fixed a problem with include that was introduced in Update 9. |
| PR 1681255 | Fixed a problem where Save As Image does not create a rendered image in Foundation |
| PR 1586883 | Fixed a problem where Part colors are not exported to step. |
| PR 6023710 | Fixed a problem where washers are not available with C'snk screw |
| PR 6001319 | Fixed a problem where embedded weldment information gets lost |
| PR 6026967 | Fixed a problem where previous custom part inherits length of the most recently placed part. |
| PR 6033504 | Fixed a problem where a revolved cutout is removing material where there is no sketch. |
| PR 6000242 | Fixed a problem where you are unable to import an STL file. |
EditPart
| Item | Description |
|---|
| PR 6006751 | Fixed a problem where the Hole Table is not listing the correct hole diameters for a counterbore |
| PR 1641087 | Fixed a problem that was causing a crash with an old part in V20 SP3 |
| PR 1668197 | Fixed a problem where DIN.PZL will not be used for lofted flanges |
| PR 1680457 | Fixed a problem where typing "=" and selecting dim adds multiple entries to variable table. |
| PR 5782978 | Fixed a problem where moving the cursor over Variable table causes zoom to happen or automatically |
| PR 2105606 | Fixed a problem where a Round disappears when part is recomputed in Version 20 |
| PR 2102531 | Fixed a problem where creating an open profile protrusion on a tapered face failed in V20 |
| PR 2096263 | Fixed a problem where you are unable to make a dimple that uses an inside edge. |
| PR 1603406 | Fixed a problem with mirror performance on grouped 2D elements, maintain relationships on |
| PR 6040150 | Fixed a problem with Tool Tips not displaying properly when using SmarTeam |
EditDraft
| Item | Description |
|---|
| PR 5992242 | Fixed a problem where EMF's are scaled incorrectly |
| PR 5941495 | Fixed a problem where a specific workflow with Blocks will cause a draft file to be unusable. |
| PR 5969985 | Fixed an abort from data submitted via a crashlog. |
| PR 2107915 | Fixed a problem where data alignment in table properties is incorrect |
| PR 6024647 | Fixed a problem that caused Solid Edge to crash when copying a fill style |
| PR 2105954 | Fixed a problem where a Japanese font is not mapped to an ACAD font. |
| PR 1684163 | Fixed a problem where you cannot copy and paste a view that contains a coordinate dim |
| PR 1535069 | Fixed a problem where you are unable to hide an overridden edge segment |
| PR 6031576 | Fixed a problem where Solid Edge runs out of memory when working with shading Drawing views. |
| PR 1644606 | Fixed a problem where a drawing view is never up to date |
| PR 1632537 | Fixed a problem where you save a Solid Edge draft file as a pdf file and the output is rotated. |
| PR 6020990 | Fixed a problem where you cannot import a draft file |
EditAPI
| Item | Description |
|---|
| PR 5544696 | Fixed a problem with Expose Parasolid id/tag via API for Body, Edge, Face, Loop, Shell and Vertex |
| PR 1619947 | Fixed a problem with a call to SurfaceBoundaries.Add failing with 'type mismatch'. |
EditInsight
| Item | Description |
|---|
| PR 5549874 | Fixed a problem where Parts are shown as Designed even though they are Simplified parts |
| PR 6029411 | Fixed a problem where Solid Edge crashed when IPA on a part or assembly from a checked out Draft file. |
TopEditUpdate 11
Product: Solid Edge
Version: 20.00.11.06
Date: 09-Jan-2009
This release of Solid Edge has been certified to run on the following:
- Windows XP Professional® operating system (32 bit or 64 bit)
- Windows Vista Business® or Vista Enterprise® operating system (32 bit or 64 bit)
- Internet Explorer 7.0 (IE 6.0 minimum)
This Update can be installed on top of Version: 20.00.00.96, 20.00.01.08, 20.00.02.03, 20.00.03.03, 20.00.04.04, 20.00.05.05, 20.00.06.06, 20.00.07.04, 20.00.08.04, 20.00.09.03, or 20.00.10.03
EditAssembly
| Item | Description |
|---|
| PR 5996010 | Cam relationship problem |
| PR 5728763 | Adding a single constraint to an adjustable assembly fails |
| PR 6015494 | Move Part with physical motion crashes |
| PR 2098270 | Solid Edge crashes when clicking white area of Display Configurations |
| PR 5918252 | Pattern not updating in this file when Height is set to original value |
| PR 6061245 | Error in Column Designer when calculating Moments of inertia |
| PR 1668883 | Moving a part causes duplicate occurrences to be created in Edgebar |
| PR 1693966 | Out of context tube still updates after a Save As of the assembly |
| PR 2110043 | Solid Edge aborts when deleting master part of pattern |
| PR 6045268 | Assembly not found error when opening a read-only upper-level FOA |
| PR 5981608 | Adding a sketch causes unrealistic file size growth |
| PR 2097365 | Variable renamed by user in V19 is not being displayed with variable table filter |
| PR 6061778 | Solid Edge aborts when printing |
EditPart
| Item | Description |
|---|
| PR 5886153 | Unable to create Sheet Metal features on a Contour Flange |
| PR 2111593 | Strange lines appear in the provided draft file |
| PR 1674428 | Memory issue with large FOP master file |
| PR 1688195 | Wrong cut-size after flattening a part |
| PR 6044788 | Accessing material table causes an abort |
| PR 2110210 | When "Go To" command is executed, Solid Edge will soon abort |
| PR 2111993 | Link being created even with Interpart options turned off |
| PR 6075309 | XpresRoute floating license not functioning properly |
EditDraft
| Item | Description |
|---|
| PR 1682459 | Solid Edge line width to ACAD color mapping doesn't work |
| PR 2108454 | Draft file will not open |
| PR 1683725 | Unable to drive position of text profile with dimensions |
| PR 1698339 | Draft file aborts when a fit is performed |
| PR 2070745 | Text position of a Chamfer Dimension value is shifted |
| PR 5938516 | Weld Symbol Properties dialog missing on General tab at times |
| PR 1687099 | Dimensions disappear when views are converted to 2D |
| PR 2100529 | When a DXF file is opened, Double byte characters are not displayed |
| PR 2110404 | Cannot show hidden edge with "Show Edge" command |
| PR 1672422 | Solid Edge is locking up when adding geometry on the working sheet |
| PR 1686469 | Solid Edge will crash when editing a callout with property text |
| PR 1692306 | Drawing views disappear when file is opened |
| PR 1694320 | Mirror command does not create connect constraints |
| PR 2095507 | Fill is applied to an area outside the selection |
| PR 2110529 | Dimension value is lying on top of Dimension line |
| PR 2111938 | AutoCAD file with multiple text color is not imported |
| PR 6064282 | Angular dimensions incorrect when saving to AutoCAD |
EditAPI
| Item | Description |
|---|
| PR 1675689 | SE x64 crashes in Models::AddSweptProtrusion |
| PR 4007438 | Added the ability to create preview under properties via automation |
| PR 1663220 | Added Block delete API |
EditInsight
| Item | Description |
|---|
| PR 6048198 | Not able to select a zone on the File -> Open dialog for Insight managed files |
| PR 6045318 | Insight: LCA not changing “In Work” back to “Available” |
| PR 1687267 | Changing display configurations of subassembly will crash |
TopEditUpdate 12
Product: Solid Edge
Version: 20.00.12.02
Date: 06-Feb-2009
This release of Solid Edge has been certified to run on the following:
- Windows XP Professional® operating system (32 bit or 64 bit)
- Windows Vista Business® or Vista Enterprise® operating system (32 bit or 64 bit)
- Internet Explorer 7.0 (IE 6.0 minimum)
This Update can be installed on top of Version: 20.00.00.96, 20.00.01.08, 20.00.02.03, 20.00.03.03, 20.00.04.04, 20.00.05.05, 20.00.06.06, 20.00.07.04, 20.00.08.04, 20.00.09.03, 20.00.10.03, or 20.00.11.06.
EditAssembly
| Item | Description |
|---|
| PR 2095252 | Files are not saved even though "save" is selected in OOM dialog |
| PR 2111882 | The display of this assembly is wrong after opening and closing a part |
| PR 6084919 | The bolt pattern in this file rotates in the higher level assembly |
EditPart
| Item | Description |
|---|
| PR 2105926 | When this part is recomputed in V20, the model will be deformed |
| PR 2109461 | The delete Face feature in this file errors when the part is recomputed in Version 20 |
| PR 2113984 | The bend-relief option for this sheet metal file cannot be changed from square to round |
EditDraft
| Item | Description |
|---|
| PR 2113468 | Mirror sketch is not including horizontal/vertical relationships |
| PR 1707517 | This Draft file cannot be opened after deleting draft views and saving |
TopEditUpdate 13
Product: Solid Edge
Version: 20.00.13.04
Date: 20-Mar-2009
This Update can be installed on top of Versions: 20.00.00.96, 20.00.01.08, 20.00.02.03, 20.00.03.03, 20.00.04.04, 20.00.05.05, 20.00.06.06, 20.00.07.04, 20.00.08.04, 20.00.09.03, 20.00.10.03, 20.00.11.06, 20.00.12.02.
EditAssembly
| Item | Description |
|---|
| PR 6088990 | Assembly feature performance |
| PR 6100668 | Printing an assembly sketch causes Solid Edge to crash |
| PR 6097501 | Weld features failed each time the weldment asm is opened |
| PR 6087130 | Improvements to assembly feature performance on open/show |
EditPart
| Item | Description |
|---|
| PR 1601288 | View of PMI with Insight Connect with unit "Millimeter" |
| PR 1698243 | Image component not found in foundation license |
| PR 5957757 | Break corner fails for this specific case |
| PR 6012839 | Simplification of flat pattern was not handled in many cases |
EditDraft
| Item | Description |
|---|
| PR 5858671 | Added registry based "Print As Black" option to Save As PDF |
| PR 2116184 | Product aborts when changing dimension style options |
| PR 6107739 | Unable to see fence with AutoCAD color scheme |
| PR 2112299 | Cannot create the 'Section Only' with PMI model view |
| PR 6107872 | Annotations do not show in JT model views |
EditAPI
| Item | Description |
|---|
| PR 1628650 | Automation workflow causes file properties to be deleted |
TopEditUpdate 14
Product: Solid Edge
Version: 20.00.14.02
Date: 10-Apr-2009
This Update can be installed on top of Versions: 20.00.00.96, 20.00.01.08, 20.00.02.03, 20.00.03.03, 20.00.04.04, 20.00.05.05, 20.00.06.06, 20.00.07.04, 20.00.08.04, 20.00.09.03, 20.00.10.03, 20.00.11.06, 20.00.12.02, 20.00.13.04.
EditDraft
| Item | Description |
|---|
| PR 1718497 | Numeric Keypad values react like mouse keys for snapping a keypoint |
| PR 1711103 | Solid Edge will export elliptical arcs as splines |
EditSEEC
| Item | Description |
|---|
| PR 1678740 | Dataset Keep Limit is ignored |
| PR 1691073 | Not possible to search from SE with integer LoV attached to query |
| PR 6023631 | JT override is not used in a top level assembly |